Melrose Technologies - 400 Pike Road  - Huntingdon Valley,  PA 19006 

Phone - 215/357-5656                          Fax - 215/357-8004

Home Up Services Specials Contact Info. Feedback About Us

Visit our Ecommerce Site at Autoliftsandparts.com

 

 

EnergyLogic Used Oil Heaters & Boilers
 
 


Amount of Space Unit Heats
up to 3500 Square feet
Commonly Used Fuels
Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel
Fuel Meter Pump
Precision metering over a wide range of fuels
UL Certification
UL listed system
Fuel Flow Rate
1.0 gallons/3.78 liters per hour
BTU Input
142,000 BTU/41.6 kW per hour
Warm Air Temp. Rise
100-120 F/37.8-48.9 C
Air Flow
1000 cfm/28 cu. m/min
Warm Air Outlet Dimensions
12"W x 12"H /31cm W x 31cm H
Ductible dual outlets
Air outlet can be on both sides
Primary Heat Exchanger
18 gauge high temperature and corrosion resistant stainless steel, UL-rated at 1500 F/816 C
System Dimensions
Cabinet -
18"H x 18"W x 92"L / 46cm H x 46cm W x 234cm L
With Tank -
37.5"H x 32"W x 60"L (69"L w/pump)
95cm H x 82cm W x 153cm L (176cm L w/pump)
Hour Meter
Analog (Clocks only actual burn time, not blower)
Exhaust Flue Diameter
8" / 20.32cm diameter
Fuel Tank
Single wall 250 gal./946.35 liter workbench. Double wall workbench available
Electrical Req.
115 VAC 60Hz, 25 amps dedicated curcuit
Shipping Weight
System with tank - 730lbs. / 332kg
System without tank - 375lbs. / 171kg
Standard Features
Integrated Air Compressor Barometric Damper, Draft Gauge, Squirrel Cage Blower
Optional Features
Various Size Fuel Tanks, Dual Warm Air Outlet Louvers
 

Amount of Space Unit Heats
up to 5000 Square feet
Commonly Used Fuels
Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel
Fuel Meter Pump
Precision metering over a wide range of fuels
UL Certification
UL listed system
Fuel Flow Rate
1.4 gallons/5.3 liters per hour
BTU Input
200,000 BTU/58.3 kW per hour
Warm Air Temp. Rise
100-120 F/37.8-48.9 C
Air Flow
1500 cfm/42 cu. m/min
Warm Air Outlet Dimensions
15"W x 15"H /38cm W x 38cm H
Ductible dual outlets
Air outlet can be on both sides
Primary Heat Exchanger
18 gauge high temperature and corrosion resistant stainless steel, UL-rated at 2000 F/1093 C
System Dimensions
Cabinet -
18"H x 18"W x 105"L / 46cm H x 46cm W x 267cm L
With Tank -
37.5"H x 32"W x 60"L (69"L w/pump)
95cm H x 82cm W x 153cm L (176cm L w/pump)
Hour Meter
Analog (Clocks only actual burn time, not blower)
Exhaust Flue Diameter
8" / 20.32cm diameter
Fuel Tank
Single wall 250 gal./946.35 liter workbench. Double wall workbench available
Electrical Req.
115 VAC 60Hz, 25 amps dedicated curcuit
Shipping Weight
System with tank - 750lbs. / 341kg
System without tank - 395lbs. / 180kg
Standard Features
Integrated Air Compressor Barometric Damper, Draft Gauge, Squirrel Cage Blower
Optional Features
Various Size Fuel Tanks, Dual Warm Air Outlet Louvers
 

Amount of Space Unit Heats
up to 8500 Square feet
Commonly Used Fuels
Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel
Fuel Meter Pump
Precision metering over a wide range of fuels
UL Certification
UL listed system
Fuel Flow Rate
2.25 gallons/8.5 liters per hour
BTU Input
340,000 BTU/99.6 kW per hour
Warm Air Temp. Rise
100-120 F/37.8-48.9 C
Air Flow
2800 cfm/79 cu. m/min
Warm Air Outlet Dimensions
19"W x 25"H /48cm W x 64cm H
Ductible dual outlets
Air outlet can be on both sides
Primary Heat Exchanger
18 gauge high temperature and corrosion resistant stainless steel, UL-rated at 2000 F/1093 C
System Dimensions
Cabinet -
28"H x 22"W x 99"L / 71cm H x 56cm W x 252cm L
With Tank -
37.5"H x 32"W x 60"L (69"L w/pump)
95cm H x 82cm W x 153cm L (176cm L w/pump)
Hour Meter
Analog (Clocks only actual burn time, not blower)
Exhaust Flue Diameter
8" / 20.32cm diameter
Fuel Tank
Single wall 250 gal./946.35 liter workbench. Double wall workbench available
Electrical Req.
115 VAC 60Hz, 25 amps dedicated curcuit
Shipping Weight
System with tank - 895lbs. / 406kg
System without tank - 545lbs. / 248kg
Standard Features
Integrated Air Compressor Barometric Damper, Draft Gauge, Squirrel Cage Blower
Optional Features
Various Size Fuel Tanks, Dual Warm Air Outlet Louvers
 

 



Commonly Used Fuels
Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel
Fuel Meter Pump
Precision metering over a wide range of fuels
UL Certification
UL listed system
Fuel Flow Rate
1.4 gallons/5.3 liters per hour
BTU Input
200,000 BTU/58.3 kW per hour
Water Output Temp. (max)
230 F /110 C
Domestic Hot Water Output
4.0 gallons / 15 liters per minute at 100 F / 37.8 C temp rise
Heat Exhchanger
Wet floor based design
Boiler Capacity
30 gallons / 113.56 liters
System Dimensions
45"H x 32"W x 50"D /
114cm H x 82cm W x 127cm L
Hour Meter
Analog (Clocks only actual burn time, not blower)
Exhaust Flue Diameter
8" / 20.32cm diameter
Fuel Tank
Single wall 250 gal./946.35 liter workbench. Double wall workbench available
Electrical Req.
115 VAC 60Hz, 20 amps dedicated curcuit
Shipping Weight
System with tank -1237lbs. / 561kg
System without tank - 812lbs. / 369kg
Standard Features
Integrated Air Compressor Barometric Damper, Draft Gauge
Optional Features
Various Size Fuel Tanks
 

Commonly Used Fuels
Used crankcase oils, ATF, hydraulic fluid, No. 2 fuel oil, and diesel fuel
Fuel Meter Pump
Precision metering over a wide range of fuels
UL Certification
UL listed system
Fuel Flow Rate
3.6 gallons/13.6 liters per hour
BTU Input
499,000 BTU/146 kW per hour
Water Output Temp. (max)
230 F /110 C
Domestic Hot Water Output
8.0 gallons / 30 liters per minute at 100 F / 37.8 C temp rise
Heat Exhchanger
Wet floor based design
Boiler Capacity
52 gallons / 196.84 liters
System Dimensions
45"H x 32"W x 68"D /
114cm H x 82cm W x 173cm L
Hour Meter
Analog (Clocks only actual burn time, not blower)
Exhaust Flue Diameter
10" / 25.4cm diameter
Fuel Tank
Single wall 250 gal./946.35 liter workbench. Double wall workbench available
Electrical Req.
115 VAC 60Hz, 20 amps dedicated curcuit
Shipping Weight
System with tank - 1550lbs. / 703kg
System without tank - 1125lbs. / 510kg
Standard Features
Integrated Air Compressor Barometric Damper, Draft Gauge
Optional Features
Various Size Fuel Tanks

 

[FrontPage Save Results Component]

Information Request Form - EnergyLogic

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

 

 

Visit our Ecommerce Site at Autoliftsandparts.com

 

Home Up Services Specials Contact Info. Feedback About Us

 

Send e mail to sales@melrose1931.com with questions or comments about this web site.

Copyright 2009 Melrose Technologies (A Division of Jay Bee Machine Works, Inc.)  All Rights Reserved.
Last modified: January 31, 2019